top of page

Abercrombie Sloane Pant Dupes on Amazon: Wide-Leg, Pleated and Pull-On Trousers From $18

4 days ago
8 min read

The Sloane pant is the most searched-for trouser on the internet right now and I understand why. It's a clean high-waisted wide leg, it presses flat, it makes a plain sweater look deliberate, and it costs $90 — $100 if you want the version with the hardware at the waist.

Ninety dollars is not outrageous for a trouser. The problem is that nobody owns one pair of work pants. You need the black, the grey and the one that isn't either of those, and now you're at $270 for the bottom half of your Monday.

So here's what I found instead. Four trouser cuts, all of them the same silhouette family as the Sloane, all on Amazon, all price-checked against the live listing on September 26, 2026. The cheapest is $18.50 and the most expensive is $46.99.

One honest note before the list: with clothing, the listed price can shift by color and size, and every one of these is a fast-moving fashion listing rather than a permanent catalog item. Check the price on the page before you buy, and read the sizing paragraph at the bottom of this post — it matters more than which pair you pick.

Quick reference shopping list

The wide-leg tailored trouser — Abercrombie Sloane: $90

  • Low: $29.99 — AFITNE high-waisted wide leg

  • Medium: $39.99 — iChosy high-waist wide straight

  • High: $46.99 — heavier suiting weight

The pleated trouser — Abercrombie: $90–$100

  • Low: $29.99 — KIRUNDO wide leg

  • Medium: $36.99 — BTFBM business wide leg

  • High: $38.99 — KIRUNDO, heavier fabric

Straight leg and ankle — Abercrombie: $90

  • Low: $18.99 — JEKAOYI straight leg

  • Medium: $37.99 — SEVEGO, true tall inseams

  • High: $39.99 — iChosy stretch straight

The pull-on ponte — Spanx and similar: $118

  • Low: $18.50 — Amazon Essentials stretch

  • Medium: $27.99 — baleaf business casual

  • High: $38.99 — stretch dress pant, five real pockets

1. The wide-leg tailored trouser

The reference: A&F Sloane Tailored Wide Leg Pant, $90. The Hardware and Belted versions are $100, the Lightweight Crepe and the Low Rise are $90, and some colorways sit at $95.

This is the one. High waist, flat front, a leg that falls straight from the hip without flaring, and a hem that hits the floor if you have the right heel on. What makes it read expensive is not the cut — plenty of pants have that cut — it's that the fabric has enough weight to hang instead of cling.

That's the whole test for a dupe here, and it's the one thing product photos can't tell you. Look for a fabric blend with at least some polyester or viscose body and avoid anything described as "super soft" or "buttery," which in trouser language means it will drape onto you rather than away from you.

Low — AFITNE high-waisted wide leg, $29.99. A third of the price of the Sloane with the same waist-to-hem line. This is the one I'd start with if you're not sure the silhouette works on you yet.

Medium — iChosy high-waist wide straight, $39.99. A slightly narrower leg than the AFITNE, which suits a shorter frame better — a very wide leg on a shorter inseam turns into a puddle.

High — heavier-weight suiting trouser, $46.99. The most expensive pair on this page and the closest to the real thing, because it's the only one with enough fabric weight to hold a crease. If you're buying one pair to wear to things that matter, buy this one. There's also a YUNLING version at $39.99.

Style tip: if you want this in linen for warm weather, the tailored look survives the switch but the crispness doesn't — linen wrinkles at the back of the knee within an hour of sitting, and no amount of money fixes that. A linen-blend wide leg at $26.99 or $39.99 is the right call precisely because you should not spend $90 on a pant that creases no matter what you do.

2. The pleated trouser

The reference: the pleated and hardware Sloane variants, $90 to $100.

Pleats are the detail that pushes a work pant from "fine" to "someone chose this." Two soft folds at the waistband, which add room across the hip without adding width at the waist — a genuinely useful piece of engineering that happens to also look good.

The failure mode with cheap pleats is that they're sewn flat and pressed in rather than cut in, so they release after two washes and you're left with a slightly baggy front. The tell in listing photos is whether the pleat still reads at the bottom of the zipper; if it's vanished by then, it was ironed, not built.

Low — KIRUNDO pleated wide leg, $29.99. Good pleat depth for the price.

Medium — BTFBM business wide leg, $36.99. The most conservative pair on this page, in the good sense — if your office leans traditional, this is the one that won't read as a trend.

High — KIRUNDO in the heavier fabric, $38.99. Same maker as the low pick, more substantial cloth, and the difference is visible in how the leg falls.

Style tip: pleated trousers want a top that's either tucked or cropped, and nothing in between. A shirt that ends halfway down the pleat hides the one detail you paid for. Full tuck, French tuck, or a boxy knit that stops at the waistband — pick one and commit.

3. Straight leg and ankle

The reference: the straight-leg Sloane, $90.

The wide leg gets the attention, but the straight and ankle cuts are the ones that actually go to work five days a week. They fit under a boot, they don't drag in a parking lot, and they photograph less but wear more.

This is also where the price floor drops out. Straight-leg work pants are the single most competitive category on Amazon and you can get a genuinely wearable pair for under twenty dollars.

Low — JEKAOYI straight leg, $18.99. Under twenty. Buy two colors and you've spent less than half a Sloane. There's also a DLOODA stretch pair at $19.99.

Medium — SEVEGO with true tall inseams, $37.99. This listing sells 34, 36 and 38 inch inseams, which almost nothing else at this price does. If you are tall and have spent your life hemming or not hemming work pants, start here.

High — iChosy stretch straight, $39.99. More recovery in the fabric, which means it holds its shape through a full day of sitting rather than going baggy at the knee by three o'clock.

Style tip: the right ankle-pant break is one to two inches of visible ankle, or full contact with the top of your shoe. The half-inch gap between hem and shoe is the one length that makes an otherwise good outfit look like it shrank. A $20 tailoring job or eight dollars of no-sew hem tape solves this permanently.

4. The pull-on ponte

The reference: Spanx wide leg and straight leg pants, $118.

Nobody's first thought about a $118 pull-on pant is "what a bargain," but the appeal is real: elastic waist, dense ponte knit, holds its shape, and looks close enough to a trouser that nobody in a meeting is going to interrogate it.

Amazon's version of this category is deep and cheap, and the quality spread is wide. What separates a real ponte work pant from leggings-with-ambition is a thick, knit-in waistband — not a drawstring, not a folded-over jersey band — and enough structure that the fabric doesn't show every contour.

Low — Amazon Essentials stretch pant, $18.50. The cheapest thing on this page and the best pure value. It's not fooling anyone into thinking it's suiting, but it doesn't have to.

Medium — baleaf business casual pant, $27.99. Comes from a performance-wear brand, which shows in the recovery. There's also a Yogipace version at $36.99.

High — stretch dress pant with five real pockets, $38.99. Actual functioning pockets, which in women's workwear is close to a miracle and worth the eleven-dollar premium on its own.

Style tip: ponte pills. All of it, eventually, including the $118 version. Wash inside out on cold, skip the dryer, and keep a fabric shaver in the laundry room — ten dollars, and it buys you an extra year on every knit you own.

How to actually shop this category

Size up, almost always. Amazon apparel sizing runs small, and the size chart in the listing is more reliable than the letter on the label. Measure your natural waist and hip, then read the chart. This is the single biggest cause of returns and it's entirely avoidable.

Sort reviews by "most recent," not "most helpful." Fashion listings change manufacturers. A pair with 4.4 stars from 2024 reviews and a run of one-star reviews in the last two months has quietly become a different pant.

Read the reviews from people who list their height. Anyone who writes "5'3" and these were perfect" has given you more usable information than the entire product description.

Check the fabric composition, not the fabric name. "Suiting fabric" means nothing. A blend with 60-70% polyester and some rayon or viscose will hang; anything over 10% spandex will cling.

Buy the same pair in two colors, not two pairs in one color. If the fit works, the fit works. The hard part is finding a cut that suits you, not finding black pants.

Five workwear notes worth having

The lint roller lives in the car, not the closet. This is the highest-leverage two dollars in getting dressed, and it only works if it's where you are when you notice the problem.

Steam, don't iron. A handheld steamer takes ninety seconds and won't put a shine on synthetic fabric the way an iron will. There's more on this in the work bag and morning essentials post.

Hang trousers by the hem, not the waist. Clip hangers at the cuff let gravity pull the crease straight overnight. Folding them over a bar puts a horizontal dent across the thigh that no amount of steaming removes.

Own one pair that's slightly too nice for the job. The point isn't the pants. It's that having something ready for the day that turns out to matter removes a decision from a morning you'll already be having a hard time with.

Three pairs is the whole wardrobe. Black, a mid-grey or navy, and one in a color or a texture. Everything past that is variation, not coverage.

Why bother with dupes

Because the price gap here isn't about quality in any way you can see across a conference table. The Sloane is well made. It is also a flat-front wide-leg trouser, which is a pattern that has existed for a hundred years and costs about eleven dollars in fabric.

The part worth paying for is fit, and fit is personal — which means the smart move is to spend thirty dollars finding out which cut is yours, not ninety dollars guessing. Once you know you're a straight-leg-with-a-34-inseam person, you can buy that pair in three colors for less than the price of one pair you weren't sure about.

Related guides

One last thing

If you buy one pair from this page, make it the heavier-weight wide leg at $46.99. Fabric weight is the only thing on this list that money reliably buys, and it's the difference between a trouser that hangs and a trouser that just sits there.

Prices checked September 26, 2026. Clothing prices move by size and color and these listings turn over fast — check the page before you buy, and email me if something here is dead and I'll fix it.

This post contains affiliate links. If you buy through one, I may earn a small commission at no cost to you.

bottom of page